Malone MPG111MD Manuel d'utilisateur télécharger pdf

MALONE

Installation & Loading Instructions - Please Read Before Beginning

12’ Bow & Stern LinesJawz Universal Adapters Mounting Bolts

40mm

50mm

Stax Pro Kayak Carrier 12’ Load Straps

Cogs

STAX PROSTAX PRO

VERTICAL FOLD-DOWN KAYAK CARRIER

. Insert a 100mm Bolt into the square

hole located in the top of the Base.

See image 2.

Step 1: Assembling the Stax Pro

. Insert the bottom of the Post into the

top of the Base. Position so the cogs

on the Post are in contact with the

cogs on the Base. See image 1.

. With the holes in the Base and Post aligned,

push the bolt through the two assemblies

until the end of the bolt is exposed.

Note: Confirm that the head of the bolt is

fully seated in the Base. See image 3.

Foam Blocks

1 2 3 4 5 6 7

MALONERInstallation & Loading Instructions - Please Read Before Beginning12’ Bow & Stern LinesJawz Universal Adapters Mounting Bolts40mm50mmSt

Page 2

Installation & Loading Instructions - MPG111MD Stax ProMALONER456. Loosen the Tightening Knob and place the carrier into the fold-down position

Page 3

Installation & Loading Instructions - MPG111MD Stax ProMALONER8910. Apply a T-knob to the bolt and slightly tighten until the carrier is secure

Page 4

Installation & Loading Instructions - MPG111MD Stax ProMALONER. Place the kayak onto the foam blocks and against the carriers. Dress the free

Installation & Loading Instructions - MPG111MD Stax ProMALONER. Place the kayak onto the Foam Blocks and against the carriers. Dress the free

MPG370 BOW & STERN LINE KITMALONERThread free endof cord throughhook.Create a “leftover right”knot & tighten.Create a “rightover left”knot &am

MALONERLimited Lifetime WarrantyMALONE AUTO RACKS, 81 County Road, Westbrook, Maine 04092Phone: 207-774-9100 Fax: 207-615-0551Website: www.malone

Pas de commentaire

Malone MPG111MD Manuel d'utilisateur